Hadco Landscape Lighting – Landscape lighting is a form that can instantly add an attractive exterior to your home. Whether you are planning on lighting a catwalk. Or your goal is to really show off your well-kept flower garden, the landscape lighting may be exactly what you are looking for. With today’s easy-to-install landscape lighting kits available at any hardware store – work could not be easier. Furthermore, here is how to install landscape lighting.
The first step to installing Hadco landscape lighting is to determine how the lights will be executed. Locate the outer receptacle closest to where you are going to install your landscape lights. If the container is not already a GFCI receptacle, then you have to replace it with one that is. Place each of the landscape lights where you want them to be placed. Place the ground spikes to the bottom of the lights and carry them on the ground. Moreover, make sure that the tips of the cables are kept above the ground surface.
With all the Hadco landscape lighting in position, use the hand shovel to dig a ditch the length of the stroke. That is about 6 inches deep. Place the UF cable in the trench and the wire clip of each light device leads to the UF cable. At the base or rear of the transformer, you will see two screw terminals. Furthermore, divide the UF cable into two separate cables (about the size of 3 inches). Hang the transformer under a ledge if possible, near the container that will be used for energy. Now, all you have to do is connect the transformer. And, just wait until the time the transformer has set to turn on the lights.great hadco landscape lighting ideas